Product Introduction：UNIQUE SILICONE GEL OFFERS COMPLIANCY, THERMAL RESISTANCE
Product Description
Features And Benefits
Applications
Tflex300 Typical Properties
TDS Download
Tflex™ 300, at pressures of 50psi, will deflect to over 50% the original thickness. This high rate of compliancy allows the material to “totally blanket” the component, enhancing thermal transfer. The material has a very low compression set enabling the pad to be reused many times. Tflex™ 300, in achieving its stellar compliancy, does not sacrifice thermal performance. With a thermal conductivity of 1.2 W/mK, low thermal resistances can be achieved at low pressures. Tflex™ 300-H is offered with a hard, metallized liner option for easy handling and improved rework. The metallized liner’s lower coefficient of friction also allows for easy assembly of parts that must slide together, such as a card into a chassis. Tflex™ 300-TG is offered with a cut-through resistant Tgard™ silicone liner. The TG liner offers a guaranteed dielectric barrier, and easier part handling for mass production.
Extreme compliancy allows material to “totally blanket” component(s)
Thermal conductivity of 1.2 W/mK
Available in thicknesses from 0.020” - 0.200” (.5mm – 5.0mm)
Low compression set enables the pad to be reused many times
